HOW TO USE

01. SETUP

Installation of Our Mini Submersible Pump is extremely simple. Connect the required length of hose to the pump and then immerse the pump in the liquid you want to transfer. Then, it becomes ready for use by correctly connecting it to the required power source according to the power requirement of the pump (12 or 24 volts) according to the volt of the product. 12V product is different, 24V product is different. ATTENTION!! Do not operate Our Mini Diver for more than 15 minutes.

02. USE

Our Mini Submersible Pump is designed to work by being completely submerged in water. You can use Our Mini Submersible Pump in liquids such as diesel, water, etc. It provides rapid transfer with a liquid transfer rate of 16-19 liters per minute. IT CANNOT BE USED ON FLAMMABLE SUBSTANCES SUCH AS GASOLINE AND THINNER. The user is responsible for any problems that may arise from the use of such liquids.

03. USAGE AREAS

• It can be used for garden irrigation.
• Suitable for car washing.
• It can be used to wash the boat and drain the water inside the boat.
• It facilitates the transfer of diesel fuel to your construction machines and tractors.
• Provides effective solutions for filling and emptying aquariums.
• It can be used to fill the caravan with water.
• It is suitable for water-based liquid insecticides that do not have a thick consistency. 

04.  How Should I Use MRK Diver?

• Do not exceed 15 minutes for single use during the day.
• For multiple uses during the day, do not exceed 5 minutes every 3 hours
• It is not suitable for 500 liters and tonnage liters at a time, the device engine will burn out before it warms up.
• Our submersible’s amperage draw at 12 v load is 3 amperes. When using a 220v drop adapter, a 5 to 10 ampere quality adapter should be chosen. High amperage adapters or low amperage poor quality adapters may burn the pump. Be careful!!! OUR COMPANY IS NOT RESPONSIBLE IF THIS IS OUT OF USE.